Order

中文

English

service


JMdoll description

 

The physical dolls sold by the company are brand new. Once the products are sold, they cannot be returned after the buyers and seller have approved them. Hope all buyers know!

 

Method of application:


    The JMdoll product is a human body model consisting of high-simulation human skin silicone and bones, as well as stainless steel and aluminum, that can simulate human activities, . The model can't stand independently, but the joints can be freely bent and positioned, but each joint has a certain range of motion limits. If it exceeds the range of motion, the model may be damaged. Model joints are not suitable for frequent activities, normal use If the silica gel is not cracked or repaired in time, it can usually be used for more than 10 years. -- There are pictures to illustrate, buyers need to take the initiative to request.
Please read this instruction carefully before using the doll. If you have any other questions, please contact the customer service.

 

About the production process
  
    1. Our prototype of the model doll was originally designed and produced by the sculptor who once served in a well-known European and American company.
    2. The use of imported environmentally friendly high-performance epoxy resin for product mold manufacturing, the model body is made of stainless steel, aluminum and other metal skeleton, wrapped in soft sponge muscle.
    3. The appearance of the use of imported high-simulation human skin silicone material, after many years of research and deployment. Non-toxic, no odor, no stickiness.
    4. The production technology of the simulation model comes from overseas, and the production process is complicated and time consuming. The quality of the model has reached even more than some similar products in Japan and Europe.

 

Accessory installation method
1. Head-screw. The screw on the neck and screw it clockwise to fit.

   Usually turn 4-5 laps, can not be screwed to the limit.
2. Hair sets - after the head is installed, the left hand to hold the bangs, the right hand carefully put the hair sleeve into the back of the head, and then tighten the remaining three sides.
3. Appliances - try to separate the legs of the model, the channel is coated with talcum powder, wrapped with plastic wrap, and then coated with talcum powder, squeeze it with your right hand and squeeze it into the hole to the appropriate position.

About dress
  1, should first brush the body powder and then wear clothes.
  2. Please remove the head and wear it if necessary.
  3. Do not wear clothing and accessories with sharp edges.
  4. When wearing earrings and other accessories, you can use fine wire or needle to puncture the holes in the silica gel, but you can't cut it with a knife and sharp objects, and you can't pull it after wearing the earrings.
  5. Don't wear too tight clothes.
  6, it is recommended to use the model's special clothing (such as sexy underwear) or consult customer service.

 

Precautions
1, silica gel will fade slightly if exposed to long-term sunlight.
2, the placement environment is as clean as possible.
3, to avoid the temperature is too high or too low, the ideal storage environment temperature is between 5-35 degrees. If the temperature is too low, it can be wrapped with electric blanket to heat it, and the silica gel has heat resistance.
4. Do not place heavy objects on the model. Please try to maintain a comfortable posture when you usually put it.
5. Do not place the model where children can reach it.

About maintenance
As shown in Figure 1, if there is a little oil seepage on the surface, it is normal, please wipe gently with a dry towel and apply talcum powder.
2. If the surface is stained with dust and stains, please take care every time. The maintenance interval varies from person to person, and it is recommended to do it once a month.

Maintenance method: If the surface of the silicone is stained with dirt, it can be cleaned with soap, shampoo, shower gel, etc. After the surface is dry, apply a talcum powder to the model. The model joints remain curved for a long time, and wrinkles appear on the surface. However, the silica gel itself has good resilience and keeps the model in a comfortable posture. After a period of time, the wrinkles will disappear.
  The makeup we make for the model is based on the requirements of the customer's reservation. It is made of special silicone paint, which is odorless, non-toxic and not easy to fall off, but don't wipe it hard, especially her face and eyebrows and eyelashes. If you use excessive force to cause hair loss and discoloration, once the faded buyer can repair or make up the makeup under our guidance, the effect depends on the individual level.
  The model can be modified and applied with general cosmetics, such as lipstick and blush. For more details, please contact customer service.

About patching:
  Although silicone products are soft, they can be cracked and wrinkled or even damaged if used improperly. In use, do not use sharp objects to touch the surface of the silicone (some people like to use the nails to force the breasts and other parts, test the softness, often leave the nail prints unfortunately, should not be avoided.), do not cut the silicone, once the silicone is cut When it continues to be used, it will easily tear along the direction of the slit, causing complete damage. Once the model breaks, stop using it and repair it. Please use our silicone adhesive when repairing. If there is a crack, first adjust the model to the position where the crack is closed, clean the crack and surrounding stains, and use the adhesive to apply the crack after drying. (Note: thicker than the lipstick, but not more, no extra The adhesive stays outside the crack, the adhesive operation time is a few minutes, not 502 instant glue, so don't have to rush!), then align and glue the crack, fix, wait for the adhesive to dry and cure. It takes 24 hours for the silicone adhesive to fully cure. Do not move the extruded doll during the period.

  


Disclaimer
   1. JMdoll product is a high simulation solid silicone model. How to use this product is the self-behavior of the purchaser. We are not responsible for the actions of our customers after the products are sold. The company has a special accessory for this product, which can be installed by the customer.
   2. JMdoll is not a children's toy. It is not sold to minors. Do not place it in a place that children can reach, nor use it in public places. The company is not responsible for any problems and disputes arising therefrom.
    3. All the model works of JMdoll are original works and do not involve any portraits of real people. However, the model produced by our company can be imitated or referenced by real people according to the customer's private requirements. After the product is sold, the customer should not show her in public, online, etc., nor allow the purchaser to give it by himself or Other parties copy. The company is not responsible for any portrait rights issues or other disputes arising therefrom.